JVC GY-HD251CHE Camcorder Body

• Description
• Specification
• Finance
• Accessories

TopGeneric Spec

Image pickup device: 1/3" inch interline-transfer CCDs
Optical system: Colour separation system: F1.4, 3-colour separation prism
ND filter: +1/4ND, +1/16ND
No of pixels:  Total: Approx 1,110,000 pixels
Colour system: PAL (wide band R-Y, B-Y encoder)
Colour bars: SMPTE HDTV colour bars / EBU colour bars
Sync system: Internal sync (built-in SSG)
External sync: BB, VBS, signal or HD tri-sync signal
Sensitivity: F8, 2000 lx (typical)
Minimum required Illumination: 6 lx with F1.4, at 18 dB
Lens mount: 1/3" bayonet system
Gain: 0, 3, 6, 9, 12, 15, 18 dB, ALC
Shutter speeds: Electronic Shutter:
Standard value: 50 Hz
Fixed values:
7.5 - 10,000 Hz, 11 steps (HDV HD60p / HDV HD30p)
6.25 - 10,000 Hz, 11 steps (HDV HD50p / HDV HD25p; DV 50i/25p mode)
6 - 10,000 Hz, 12 steps (HDV HD24p / DV 24p)
Variable scan: About 60 to 10,000 Hz (HDV HD60p / HDV HD30p) /
About 50 to 10,000 Hz (HDV HD50p / HDV HD25p; DV 50i/25p mode)
About 24 - 10,000 Hz (HDV HD24p; DV 24p)
Dynamic range: 300% or more

RECORDING :-
Recording formats: 720p/50 & 60, 25 & 30, and 24 recording
Recording devices: Built-in MiniDV recorder.
External optional Hard Disk Recorder DR-HD100E

VIDEO HDV
Video signal recording format: HDV1 format, 8-bit, 19.7 Mbps
Compression: MPEG-2 video (profile & level: MP@H-14)
Sampling frequencies:
720/60p: 74.25/1.001 MHz (4:2:0 component)
720/50p: 74.25 MHz (4:2:0 component)
1080/60i: 74.25/1.001 MHz (4:2:0 component, cross conversion only)
1080/50i: 74.25 MHz (4:2:0 component, cross conversion only)
DV
Video signal recording format: DV format, 8-bit, 25 Mbps
Compression: DV compression, 4:2:0
AUDIO: HDV
Audio signal recording format: MPEG1 Audio Layer II, DV
Audio signal recording format: 16-bit (locked audio), 48 kHz PCM for 2 channels or 12-bit, 32 kHz PCM for 4 channels
Usable tape: Mini DV tape
Tape speed: 18.831 mm/sec.
Record/play time: 63 minutes (with an M-DV63PROHD tape)
CONNECTORS HD/SD SDI output: 0.8 V (p-p), 75 ohms, unbalanced (BNC)
HD SDI: SMPTE292M/299M standard (embedded audio)
SD SDI: SMPTE259M/272M standard (embedded audio)
Analogue composite output:
1.0 V (p-p), 75 ohms, unbalanced (RCA)
Analogue component output:
Y: 1.0 V (p-p), 75 ohms, unbalanced (BNC)
R-Y / B-Y: 0.7 V (p-p), 75 ohms, unbalanced (BNC)
Analogue composite input:
1.0 V (p-p), 75 ohms, unbalanced (BNC: switchable from Genlock input)
Genlock input:
1.0 V (p-p), 75 ohms, unbalanced (BNC)
Audio input: Mic: -60 dBs, 3 kohms, balanced (XLR), +48 V output for phantom power supply
Line: +4 dBs, 10 kohms, balanced (XLR)
Audio output: -8 dBs, low impedance, unbalanced (RCA)
Other: Earphone jack: -18 dBs to -60dBs, 8-ohm impedance (stereo mini-jack x 2)
Time code input: 0±6 dBs, high impedance, unbalanced (BNC: switchable from component output)
Time code output: 0±6 dBs, low impedance, unbalanced (BNC: switchable from component output)
IEEE1394 connector: 6-pin
Remote connector: DIN 6-pin
Power requirement: DC 12 V (10.5 - 17V) 
Power consumption: Approx 20W (in record mode)
Operating Temperature: 0°C to 40°C
Storage: -20°C to 60°C
Operating Humidity: 30% to 80% RH
Storage: 85% RH or less
Dimensions (WxHxD): 242mm (W) x 233mm (H) x 414mm (D)
Weight: Mass: 3.7 kg (including viewfinder, microphone and tape)

ACCESSORIES (Supplied)
Viewfinder x 1
Microphone x 1
SD memory card x 1