Product Specification
Controller: SandForce 2281 Series Processor with 7% Over Provisioning
NAND: Tier 1 Major Multi-Level Cell (MLC) High-Performance Sync-NAND
Flash Form Factor: Standard 9.5mm 2.5"
Interface: SATA 6Gb/s, 3Gb/s & 1.5Gb/s supported, SATA 3.0 Compliant
Capacity: 120GB useable capacityTotal Flash Memory Components - 128GB, 8GB allocated to real-time data redundancy & error correction
Formatted Capacity: 111GiB RAID
Support: Qualified for single drive and multiple drive production workstation RAID 0/1/10/0+1 and SPAN usage.
SMART Attributes: Standard5 Native Command
Queuing: up to 32 commands
Manufacturer Model Number: OWCSSDMX6G120
RoHS Compliant: Yes
Height (max): 9.45mm (0.372″)
Width (max): 70.06mm (2.758″)
Length (max): 100.12mm (3.941″)
Weight: 80 grams +/- 2 grams0.176 lbs +/- 2.82 oz
Data Reliability
ECC Recovery: Up to 55 bytes correctable per 512-byte sector
Security: Chip Based
Data Encryption: 128-bit AES-compliant
TRIM Support: OS Dependent Nonrecoverable
Read Errors: Less than 1 sector per 1016 bits read
Sustained
Reads 6Gb/s (up to): 559MB/s Sustained
Writes 6Gb/s (up to): 527MB/s Sustained
Reads 3Gb/s (up to): 284MB/s Sustained
Writes 3Gb/s (up to): 266MB/s Read Incompressible
Data Rate (up to): 479MB/s Write Incompressible
Data Rate (up to): 282MB/s
Random 4K Read4: Up to 60,000 IOPS
Random 4K Write4: Up to 60,000 IOPS
Read Latency: less than 0.1ms
Write Latency: less than 0.1ms
Active
Read: 3000mW (3.0W) Maximum draw
Write: 4500mW (4.5W) Maximum draw
Idle: Less than 1000mW (1.0W)
Operating Temperature:
- (°F): 32°F to 158°F
- (°C): 0°C to 70°C
Non-Operating Temperature:
- (°F): -67°F to 302°F
- (°C): -55°C to 150°C