Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration.
A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. A dedicated power distribution box keeps wiring to a minimum while providing power to essential accessories. Two regulated 12V P-taps, one 500mAh full-size USB connector, and a DJI Lightbridge connector enable connectivity and power to everything a film maker needs. Silent motors prevent on set mics picking up motor noise.
Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controller and when attached to vehicles, it connects to an optional GPS module allowing it to stabilize actively for a smoother shot.
A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.
Refined Balance A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility and ability to handle rapid movements or high-G situations.
Magnesium Construction Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.
Intelligent Batteries Intelligent Ronin-MX batteries are compact, light and offer a long battery life of 3 hours. Multiple batteries can be easily brought to set for a full day of filming. Over-charge and over-depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by clear LEDs and in the DJI GO app.
Remote Focus Control The DJI Focus uses DJI’s expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just ±0.02 of accuracy in the hand so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so that subjects can be kept in focus no matter how they move. When upgraded with a Focus Expansion Module, the Focus can control aperture or focus across Lightbridge 2’s 3.1miles (5km) range.
Universal Mounting Mount the Ronin-MX to aircraft easily using a specially designed mounting plate. A separate universal Quick Release system that doubles as a vibration dampening system allows the Ronin-MX to be connected to everything from jib to tripod and anything in between. This plate isolates the Ronin-MX from unwanted vibrations coming from the platforms it is mounted to, and makes it usable everywhere.
Compatible with DJI M600
Supports RED EPIC, ARRI ALEXA Mini and more cameras
Designed for stability in high G-force environments
5 minute set-up
Professional 3-axis handheld stabilization
3 modes of operation: Upright, Underslung, Briefcase
Auto Tune Stability (ATS) for rapid balancing
SmoothTrack™ movement smoothing
General Built-In Functions Operation Modes:
Jib or Wirecam Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported
Mechanical & Electrical Characteristics Working Current:
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Operating Temperature: 5° F ~ 120° F (-15° C ~ 50° C) Weight Including handle bar: 6.11 lb (2.77 kg) Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions Excluding handle bar: 280 mm (W) x 370 mm (D)x 340 mm (H) Including handle bar: 560 mm (W) x 370 mm (D) x 440 mm (H)
Peripheral Camera Tray Dimensions:
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections: 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1 GCU Input Power: 4S Ronin-M Battery Connections: 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0 PC Assistant Software Requirements: Windows XP or above; Mac OS X 10.9 or above Mobile Assistant Software Requirements: iOS 7.1 or above; Android 4.3 or above
Working Performance Load Weight (Reference Value): 10 lb (4.5 kg) Angular Vibration Range: ± 0.02° Maximum Controlled Rotation:
Datalink Lightbridge\2.4G Bluetooth Datalink\2.4G Datalink\900M Datalink
Accessorries IOSD MARK II\IOSD Mini\DT7&DR16 RC System
*** Warranty period may varies according to local laws and regulations.
1. The following conditions must be met for warranty service:
During warranty period, product is normal used, as intended by the manufacturer.
No unauthorized disassembling, modification or installation has been performed.
Labels, Serial Numbers, waterproof mark, false proof mark, etc. show no signs of tampering or altering;
Valid proof-of-purchase, receipt or order number (DJI Direct Sales.is provided.
2. Following situations are not subject to warranty service conditions:
Crash or burning caused by non-manufacturing factors.
Damage caused by unauthorized modification, disassembling or shell opening which did not follow the instruction of official manuals.
Damage caused by improper installation, or incorrect use or operation despite of the guidance of manuals.
Damage caused by unauthorized modification of circuit, mismatch or misuse of battery and charger.
Damage caused by any flights which didn’t follow the instructions of the manuals.
Damage caused by operation in bad weather (i.e. strong wind, rain, sand/dust storm, etc.)
Damage caused by operating the unit in an electromagnetic interference environment (i.e. mining area, radio transmitting tower, high-voltage wire, substation, etc.).
Damage caused by operating the unit in a known environment with interference with other wireless devices (i.e. transmitter, video-link, Wi-Fi signals, etc.).
Damage caused by operating the unit with a weight greater than safe takeoff weight.
Damage caused by forced flight when components have been aged or damaged.
Damage caused by reliability or compatibility issues when using unauthenticated third-party parts.
Damage caused by operating the unit with a low charged or defective battery.
* Finance available to UK incorporated limited companies only
Photolease Company Finance from £25.56 (ex VAT) per month.
All lease figures below exclude VAT. Finance available to UK incorporated limited companies only.
Select "Photolease finance" as the payment option at checkout. Finance is only available to UK incorporated limited companies. A minimum basket total of £1,000.00 applies, Photolease will normally contact you within one hour of receipt of your application if sent during business hours of 9am - 5pm (BST), Monday to Friday.
Photolease Ltd is an independent finance company specialising in leasing equipment to the creative industry. Visit photolease.co.uk for more information as well as their terms and conditions. Offer is subject to status. Terms and conditions apply. Written details available upon request.