Your SEO optimized title

Hague HPS Power Slider

Powered Camera Slider

Hague HPS Power Slider

Hague HPS Power Slider

Powered Camera Slider

SKU: 31730

Cat no: 9236

  • Motorise Your Camslide Or Glidetrack
  • Compatible With Igus Rails
  • Quick & Simple Use
  • Compact & Lightweight
Add to wishlist

Estimated Delivery 2 to 3 days

£208.00 (ex vat) £249.60 (incl vat)

Hague HPS Power Slider

The new Hague HPS Power Slider enables you to upgrade your Hague Camslide, Glidetrack SD/HD or Igus camera slider to a motorized version. The Power Slider gives you much better control, creating much smoother camera movement than can be achieved by pushing the carriage by hand.

The variable speed controller enables the camera to go smoothly from a still position up to a required speed by turning the control knob, the knob can then be turned back until the carriage comes to a stop at the required stop position. The carriage can be controlled in either direction.

The drive cable supplied with the unit is suitable for 1 metre length rails, if the rail's length is less than 1 metre the cable can easily be shortened to suit. An optional longer drive cable is available for rails between 1 to 2 metres.

The controller requires a power supply of 6 - 12v DC depending on the speed range required. A UK mains adapter is supplied with the Power Slider which can be used at 6v, 9v or 12volt, this gives a good range of speeds.

Key Features:
Motorize your Camslide or Glidetrack
Compatible with Igus Rails.
Quick & simple use
Compact & lightweight
Added control
Product Options:
Select your preference from the drop-down menu at the top of the page when ordering, the product options are as follows:

Product code HPS10-40 for Hague Camslide CSLID, Igus Rail WS-10-40, Glidetrack SD,
Product code HPS-E for Hague Camslide Easyglide 1000/640.

Product Specification

HPS Specs:
Weight Limit:
When the track is in a horizontal position the Power Slider's motor will move the carriage along the rail/track with a maximum load of 5kg, or 12kg if the carriage has hybrid bearings. (This is total weight on the carriage, camera plus head.)

Please note the motor drive is not silent, so the camera's onboard microphone is likely to pick up the sound of the motor, especially at the higher speeds.

The Carriage:
Approximate speeds powered at 6v and 12volt. Distance the carriage will travel, per second, when powered at 6 volts - Set at minimum speed 1.6mm. Set at maximum speed 54.6mm. Distance the carriage will travel, per second, when powered at 12 volts - Set at minimum speed 12.6mm. Set at maximum speed 112mm. The speeds are variable from minimum to maximum and the supplied mains adapter can be set at either 6v, 9v or 12volt.

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.