Kramer WP-580TXR HDMI, Bidirectional RS-232 & IR over Extended Range HDBaseT Twisted Pair Receiver
Kramer's WP−580TXR is an extended range, HDBaseT twisted pair wall plate transmitter for HDMI signals. The WP−580TXR inputs HDMI signals and converts them into an HDBaseT twisted pair signal that it transmits to a WP−580RXR receiver.
Key Features -
Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel) in normal mode; 4.95Gbps (1.65Gbps per graphic channel) in ultra mode.
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC.
EDID PassThru - Passes EDID signals between the source and display.
2K & 4K Support in Normal Mode.
System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p @60Hz @24bpp) when using BC−DGKat623 cables.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Indicators - Status LEDs for input, output, link and power.
Dimensions - 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17" x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
Wall Plate Size - 2 gang EU/US.