Panasonic AK-HRP200 Studio Camera Remote Operating Panel
Compact, lightweight, joystick-type remote operation panel
The AK-HRP200 is a compact, lightweight, joystick-type remote operation panel (ROP) that provides precise, rapid, and comprehensive control of the HC3800’s powerful capabilities. Currently, the HRP200 and HCU200 connect via optional serial cables (e.g. ROP-50M) at a distance of up to 50 meters.
The free system firmware upgrade available before NAB 2013 will add IP control communication between ROP and HCU, and will also permit the ROP to set-up and control Panasonic PTZ cameras such as the AW-HE120 via IP. Scene files, user files and lens files can be stored on and retrieved from SD-HC memory cards at both the HCU and HRP control panel.
The ROP can be connected to the camera control unit via an ROP serial cable (e.g., ROP-50M, sold separately) up to a distance 164’ (50m). Connection between the camera and a CCU is established via a dedicated optical fiber cable (sold separately).
Note: Memory cards used with the unit should conform to SD or SDHC standards. 8MB to 2GB SD memory cards and 4 to 32GB SDHC memory cards can be used. SDXC memory cards are not supported. Avoid use in areas with high temperature and humidity, water droplets, and static electricity.
Control of up to 19 Cameras with IP Connection
The AK-HRP200 Remote Operation Panel supports both serial (1:1) and IP connection. IP connection enables up to 19 cameras to be controlled by a single remote operation panel.
Supports a Variety of Cameras
Four connection modes-CCU Serial, CCU IP, Remote Camera Serial, and Remote Camera IP-enable single or combined remote control of studio handy cameras, multi-purpose cameras, HD convertible cameras, and HD integrated cameras.
ROP Menu Setting
The menu can be displayed on a monitor connected to the camera control unit, so detailed camera settings can be made by operating the remote operation panel.
Joystick Control Lever
A simple button layout and an iris control lever ensure intuitive and stable operation. The joystick control lever enables fine manual iris / pedestal operation.
SD Memory Card Slot
Scene files and user files can be saved with the SD/SDHC memory card slot. SD memory cards (not included) can also be used for firmware upgrades. 2
Compact 6U Size
The unit is compact, with a width of 3.6" (92mm) and a 6U height for easy rack mounting. It is shipped with the rack mount brackets pre-installed.
- Compact 6U Size
- Joystick Control Lever
- Controls upto 19 Cameras
- SD Memory Card Slot