Panasonic BT-LH2170 21.5" LCD Production Monitor
Panasonic's BT-LH2170 is an 21.5" LCD production monitor with native 1920 x 1080 HD resolution, advanced 3D assist features and significant advances in functionality.
The BT-LH2170 offers a 3D look-up table (LUT) producing faithful colour hues and smooth gradation; a production-tough aluminum die-cast chassis and 12V DC operation that make it ideal for field use; and an eco-friendly panel with mercury-free LED backlight.
The LH2170 offers critical viewing with 1920 x 1080 full HD resolution. The monitor’s high brightness (250cd /m²), high contrast (1000:1), horizontally-aligned IPS panel has 178 degree vertical and horizontal viewing angles; it delivers exceptional imagery with superb colour accuracy and exhibits minimal changes in brightness and colour due to the viewing angle. The LH2170’s 3D-LUT with six-pole colour correction includes a look-up table for each signal level, and applies 10-bit image processing to each RGB colour to balance the six coordinate axes of the three primary colours (RGB) and their complementary colours (CMY), resolving colour drifting at low light levels and keeping colours vividly natural.
The 3D assist functionality is ideal for production crews that require 3D review in the field, such as when using a 3D rig system. The LH2170 augments 3D assist functions with the introduction of a top and bottom display in addition to side-by-side display (for a 2D view of various 3D checks including composition, convergence, colour and luminance, focus and zoom position, and parallax); a Focus-in-Red focus assist, including in Side-by-Side mode; an additional 1.5% interval vertical marker, and not only gray but colour subtraction in overlay.
Advanced features new to the LH2170 are an in-monitor display; a Y-Map display that makes it easy to confirm luminance level map; a Zebra display that is the same function that a pro camera utilizes to detect the level over or assigned in between level portion; and a two-window display that can be used in combination with the Y-Map or Zebra displays. The LH2170 will display closed captions with an SDI or video input; it supports the EIA/CEA-708 and EIA/CEA-608 SD-SDI closed captioning standards,
The LH2170 incorporates diverse video inputs and remote terminals to realize superb operability in a system configuration, including 3G-SDI and HD/SD-SDI (with loop-through) HDMI, Digital and analogue DVI-I (Single Link), composite and GPI inputs, as well as RS-232C and RS-485. The new RS-485 Serial Remote permits up to 32 monitors to be connected in a loop-through configuration, each of which can be designated and controlled by a distinct ID number. TSL commands allow text display (8 alphanumeric characters) and tally indication. The monitor also supports unique Panasonic commands (equivalent to RS-232C).