Sonifex RB-DSS10 10 Way Digital Source Selector

The Sonifex Redbox RB-DSS10 Digital Source Selector is a 1U rack-mount which produces an AES/EBU and S/PDIF level digital audio output from 10 selectable AES/EBU or S/PDIF digital input signals.

There are 10 illuminated front panel push buttons, which select and indicate the current channel selection.

The selection and indication is also available through a remote connector on the rear panel.

To stop accidental front panel selection there is a remote input to inhibit the front panel buttons, this is available as a seperate option.

The digital receivers in this unit are fully 24 bit, 96kHz capable.

When an input is selected from the front panel, or remotely, the unit will attempt to capture the incoming signal on either the AES/EBU or the S/PDIF signal inputs, with priority given to the AES/EBU input. If the AES/EBU signal becomes locked while the S/PDIF signal is routed, the unit will automatically switch to the incoming AES/EBU signal.

Once the receiver has successfully locked to a digital input, the LED illuminates, the tally is made, and the audio is routed simultaneously to both the digital audio outputs and converted to analogue audio for monitoring on the front panel headphone socket.

If the incoming audio signal is not present, the push button LED and remote tally flash to indicate that the incoming digital signal is missing.

The headphone output has its own volume control, which is independent of the level adjustment for the main outputs, and has a maximum output level of +12dBu.