Rode NTG1 Condenser Shotgun Microphone

A lightweight condenser shotgun microphone designed for professional applications

Rode NTG1 Condenser Shotgun Microphone

A lightweight condenser shotgun microphone designed for professional applications

SKU: NTG1

Cat no: 9114

  • Broadcast sound quality
  • Low noise circuitry
  • Super-cardioid polar pattern
  • Condenser transducer
  • Rugged metal construction
  • Two step High Pass Filter (Flat/80Hz)

Immediate dispatch

Currently 10+ in stock

£139.00 (ex vat) £166.80 (incl vat)

NTG1 Condenser Shotgun Microphone


RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.



Key Features

  • Broadcast sound quality
  • Low noise circuitry
  • Super-cardioid polar pattern
  • Condenser transducer
  • Rugged metal construction
  • Two step High Pass Filter (Flat/80Hz)
  • Low handling noise
  • Low weight - 105g (3 oz.)
  • Includes mic clip, wind shield and zip case
  • Ideal for professional applications within the film, video, television and production industries
  • 10 year extended warranty when you register your microphone

Product Specification

Acoustic Principle Line Gradient
Active Electronics JFET impedance convertor with bipolar output buffer
Capsule 0.50"
Polar Pattern Supercardioid - Picks up the front and sides and rejects 150° to the rear.
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 50Ω
Maximum SPL 139dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.9mV
Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 18dB-A
Power Options +24V phantom power required from mixer or interface, +48V phantom power required from mixer or interface
Weight 105.00gm
Dimensions 219.00mmH x 22.00mmW x 22.00mmD
Output XLR
Warranty 1 year with free extension to 10 years following registration

This product includes:

  • Rode NTG1 Shotgun Microphone
  • Rode RM5 Durable Microphone Clip
  • Rode WSVM Pop Filter/Wind Shield
  • Rode ZP1 Padded Zip Pouch 

Rode Warranties

Register for your Rode HERE.

All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from an authorised retailer then your warranty can be extended to five years, ten years or lifetime* (depending on the model) by registering the details of your purchase using this form.

RØDE’s extended warranty program gives you the peace of mind that your investment is protected for many years to come. Full Terms & Conditions.

The RØDE extended warranty gives you the peace of mind that your investment is protected for many years to come.

FAQ's

Q:What information should I include with a service/repair request?
A:The best way to request a service is to register your microphone for warranty and then request a service via the 'My Mics' page.

If you are requesting a service or repair of a product via email please let us know the following information:

  • Product range
  • Serial number
  • Basic fault description
  • Your return address
  • Your contact phone number

With this information we will be able to quickly provide you with further assistance for your product.

Q:Is my microphone covered by a service warranty?
A:RØDE microphones come with a 1 year manufacturers warranty, this can be upgraded to one of our free extended warranties by the registration of the microphone on our website. Please register your microphone using the WARRANTY tab above.

Our warranty covers faulty workmanship and faulty components. RØDE may either repair or replace the product at their sole discretion. The product must be returned to the service centre in the country that the product was purchased for service and repair.

Please note: the warranty does not cover normal wear and tear, nor the use of the product in heavily corrosive, polluted or extremely humid environments.

Q:Can I still get support for my legacy/discontinued product?
A:Yes, at RØDE we support our products for as long as possible, many years into their retirement. We understand that you will often have a "go to" mic that you simply cannot work without and we will do everything we can to assist with the repairs of these legacy products.

Spare parts are usually available so please contact your local service agent for assistance with these repairs.

Q:What is the procedure for returning a faulty product?
A:Please view our FAQ to try and troubleshoot the issue. If you believe the microphone is at fault please contact our distributor in your country of residence for the correct procedure for returning your product. To find your nearest distributor please use our technical support finder here.

DO NOT send any product back to RØDE without first obtaining a unique RMA number.

Q:How do I register for the RØDE extended warranty?
A:Registration for the extended warranty can be made by completing our online registration form. 

Once registered you warranty will be extended to either 10 years, 5 years capped or lifetime, depending on your product.

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.

Product Videos

RØDE University - ENG Recording