Rode NTG4 Directional Condenser Microphone

Designed to provide premium audio recording in a versatile range of applications

Rode NTG4 Directional Condenser Microphone

Designed to provide premium audio recording in a versatile range of applications

SKU: NTG4

Cat no: 14759

  • Broadcast sound quality
  • Low noise circuitry
  • Rugged metal construction
  • Convenient digital switching
  • High Frequency Boost
  • High Pass Filter (Flat/75Hz)
  • PAD (-10db)
User GuideProduct Info Add to wishlist

Immediate dispatch

Only 4 left in stock

£155.00 (ex vat) £186.00 (incl vat)

Rode NTG4 Directional Condenser Microphone


The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.

Intuitive Digital Switching
Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off.

Super Low-Noise
The NTG4 & NTG4+ both feature an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character.



Key Features

  • Broadcast sound quality
  • Low noise circuitry
  • Rugged metal construction
  • Convenient digital switching
  • High Frequency Boost
  • High Pass Filter (Flat/75Hz)
  • PAD (-10db)
  • 10 year extended warranty when you register your microphone

Product Specification


Acoustic Principle Line Gradient
Capsule 0.50"
Polar Pattern Supercardioid - Picks up the front and sides and rejects 150° to the rear.
Address Type End
Frequency Range 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 16dB-A
Power Options +12V phantom power required from mixer or interface
+24V phantom power required from mixer or interface
+48V phantom power required from mixer or interface 
Weight 126gm
Dimensions 225mmH x 22mmW x 22mmD
Output XLR
Warranty 1 year with free extension to 10 years following registration

This product includes:

  • Rode NTG4 Directional Condenser Microphone
  • Rode RM5 Durable Microphone Clip
  • Rode ZP1 Padded Zip Pouch
  • Rode Windshield for BTG4 & NTG4+ 

Rode Warranties

Register for your Rode HERE.

All RØDE Microphones products are warranted for one year from date of purchase. Depending on the microphone model the warranty can be extended to five years, ten years or lifetime (subject to terms & conditions ) by registering the details of your purchase using this form.

The RØDE Microphones extended warranty gives you the peace of mind that your investment is protected for many years to come.


FAQ's

How do I register for the RØDE extended warranty?


Registration for the extended warranty can be made by completing our online registration form.

Once registered you warranty will be extended to either 10 years, 5 years capped or lifetime, depending on your product.

What is the procedure for returning a faulty product?

Please view our FAQ to try and troubleshoot the issue. If you believe the microphone is at fault please contact our distributor in your country of residence for the correct procedure for returning your product. To find your nearest distributor please use our technical support finder here.

DO NOT send any product back to RØDE without first obtaining a unique RMA number from us.

Is my microphone covered by a service warranty?

RØDE microphones come with a 1 year manufacturers warranty, this can be upgraded to one of our free extended warranties by the registration of the microphone on our website. Please register your microphone using the WARRANTY tab above.

Our warranty covers faulty workmanship and faulty components. RØDE may either repair or replace the product at their sole discretion. The product must be returned to the service centre in the country that the product was purchased for service and repair.

Please note: the warranty does not cover normal wear and tear, nor the use of the product in heavily corrosive, polluted or extremely humid environments.

I want to buy a RØDE mic from overseas. Will the warranty be valid?

The warranty is only valid in the country of purchase so in the unlikely event that the mic were to fail it would need to be returned to the country of purchase for repair.

Alternatively, the mic can be sent to a local distributor but they may (at their discression) charge an admin fee for repairing a product that was not bought locally. As we offer a 10 year warranty this is always worth considering when adding up the initial cost of the mic.

 

Can I still get support for my legacy/discontinued product?

Yes, at RØDE we support our products for as long as possible, many years into their retirement. We understand that you will often have a "go to" mic that you simply cannot work without and we will do everything we can to assist with the repairs of these legacy products.

Spare parts are usually available so please contact your local service agent for assistance with these repairs.


What information should I include with a service/repair request?

The best way to request a service is to register your microphone for warranty and then request a service via the 'My Mics' page.

If you are requesting a service or repair of a product via email please let us know the following information:

  1. Product range
  2. Serial number 
  3. Basic fault description
  4. Your return address
  5. Your contact phone number

With this information we will be able to quickly provide you with further assistance for your product.

Mounts Click to expand

Quick View Rode SM4-R Suspension Shock Mount

Rode SM4-R Suspension Shock Mount

£33.00 (ex vat) £39.60 (incl vat)
Quick View Rode NTSM5 Camera Ring-Clamp Shock Mount

Rode NTSM5 Camera Ring-Clamp Shock Mount

£32.50 (ex vat) £39.00 (incl vat)

Softies & Suspension Click to expand

Quick View Rycote AV Softie Windshield Kit

Rycote AV Softie Windshield Kit

£90.00 (ex vat) £108.00 (incl vat)
Quick View Rode PG2-R Pistol Grip Shock Mount

Rode PG2-R Pistol Grip Shock Mount

£49.17 (ex vat) £59.00 (incl vat)
Quick View Rode SM3-R Camera Shoe Shock Mount

Rode SM3-R Camera Shoe Shock Mount

£35.76 (ex vat) £42.91 (incl vat)
Quick View Rycote Super-Shield Kit - Medium

Rycote Super-Shield Kit - Medium

£205.00 (ex vat) £246.00 (incl vat)
Quick View Rycote Super-Softie Windshield - 15cm (19/22)

Rycote Super-Softie Windshield - 15cm (19/22)

£85.00 (ex vat) £102.00 (incl vat)
Quick View Rycote 15cm Classic-Softie Kit (19/22)

Rycote 15cm Classic-Softie Kit (19/22)

£115.00 (ex vat) £138.00 (incl vat)

Windjammers Click to expand

Quick View Rode WS6 Deluxe Windshield

Rode WS6 Deluxe Windshield

£33.00 (ex vat) £39.60 (incl vat)

Questions & Answers

1 Question

Is this mic suitable for use on a handheld camcorder (e.g. Sony NX100) for weddings and events. Can you recommend an alternative? 1 Answer

Posted on: Tuesday, 7 June 2016
Posted by: Gail Tudor

answer this question

1 Answer

Posted on: Tuesday, 7 June 2016

Posted by: Steve Gover

Hi,

This will be fine for weddings as long as you have an XLR input on your camera.

Thanks,

Answer this question

Ask a Question...

Please login to your account to post a question.

Product Videos

Introducing the NTG4 and NTG4+ Shotgun Microphones