Your SEO optimized title

Rode Stereo VideoMic Camera-Mounted Stereo Microphone

An ideal microphone for capturing environmental and ambient sounds

Rode Stereo VideoMic Camera-Mounted Stereo Microphone

Rode Stereo VideoMic Camera-Mounted Stereo Microphone

An ideal microphone for capturing environmental and ambient sounds

SKU: Stereo VideoMic

Cat no: 6707

  • Capture the true ambience of the recording space
  • High level or rear rejection
  • Versatile Shotgun Stereo Microphone
  • 'Dead Kitten' removable furry wind-cover included as standard
Add to wishlist

Estimated Delivery 2 to 3 days

£120.00 (ex vat) £144.00 (incl vat)

Rode Stereo VideoMic Camera-Mounted Stereo Microphone


The RØDE Stereo VideoMic is a high-quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.

Two high-resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.

The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.

An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.

The RØDE Stereo VideoMic stereo on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty. 

Product Specification


Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.50"
Polar Pattern Cardioid - Picks up audio from the front and sides and rejects it from the rear
Paired cardioid - capsules in X-Y stereo pattern 
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 20dB-A
Power Options 9V
Weight 288.00gm
Dimensions 65.00mmH x 102.00mmW x 170.00mmD
Output 3.5mm
Warranty 1 year with free extension to 10 years following registration

This product includes:

  • Rode Stereo VideoMic On-Camera Microphone
  • Rode Deadkitten Artificial Fur Wind Shield 

Rode Warranties

Register for your Rode HERE.

All RØDE Microphones products are warranted for one year from date of purchase. Depending on the microphone model the warranty can be extended to five years, ten years or lifetime (subject to terms & conditions ) by registering the details of your purchase using this form.

The RØDE Microphones extended warranty gives you the peace of mind that your investment is protected for many years to come.


FAQ's

How do I register for the RØDE extended warranty?


Registration for the extended warranty can be made by completing our online registration form.

Once registered you warranty will be extended to either 10 years, 5 years capped or lifetime, depending on your product.

What is the procedure for returning a faulty product?

Please view our FAQ to try and troubleshoot the issue. If you believe the microphone is at fault please contact our distributor in your country of residence for the correct procedure for returning your product. To find your nearest distributor please use our technical support finder here.

DO NOT send any product back to RØDE without first obtaining a unique RMA number from us.

Is my microphone covered by a service warranty?

RØDE microphones come with a 1 year manufacturers warranty, this can be upgraded to one of our free extended warranties by the registration of the microphone on our website. Please register your microphone using the WARRANTY tab above.

Our warranty covers faulty workmanship and faulty components. RØDE may either repair or replace the product at their sole discretion. The product must be returned to the service centre in the country that the product was purchased for service and repair.

Please note: the warranty does not cover normal wear and tear, nor the use of the product in heavily corrosive, polluted or extremely humid environments.

I want to buy a RØDE mic from overseas. Will the warranty be valid?

The warranty is only valid in the country of purchase so in the unlikely event that the mic were to fail it would need to be returned to the country of purchase for repair.

Alternatively, the mic can be sent to a local distributor but they may (at their discression) charge an admin fee for repairing a product that was not bought locally. As we offer a 10 year warranty this is always worth considering when adding up the initial cost of the mic.

 

Can I still get support for my legacy/discontinued product?

Yes, at RØDE we support our products for as long as possible, many years into their retirement. We understand that you will often have a "go to" mic that you simply cannot work without and we will do everything we can to assist with the repairs of these legacy products.

Spare parts are usually available so please contact your local service agent for assistance with these repairs.


What information should I include with a service/repair request?

The best way to request a service is to register your microphone for warranty and then request a service via the 'My Mics' page.

If you are requesting a service or repair of a product via email please let us know the following information:

  1. Product range
  2. Serial number 
  3. Basic fault description
  4. Your return address
  5. Your contact phone number

With this information we will be able to quickly provide you with further assistance for your product.

Bags & Cases Click to expand

Quick View Rode Stereo Videomic Bag

Rode Stereo Videomic Bag

£15.00 (ex vat) £18.00 (incl vat)

Brackets & Mounts Click to expand

Quick View Rode Pivot Adapter

Rode Pivot Adapter

£30.00 (ex vat) £36.00 (incl vat)

Mounts Click to expand

Quick View Rode PG1 Cold Shoe Pistol Grip

Rode PG1 Cold Shoe Pistol Grip

£12.50 (ex vat) £15.00 (incl vat)

Windjammers Click to expand

Quick View Rode Dead Kitten Windshield

Rode Dead Kitten Windshield

£25.00 (ex vat) £30.00 (incl vat)

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.