Rode Stereo VideoMic X

Professional grade stereo on-camera microphone

Rode Stereo VideoMic X

Professional grade stereo on-camera microphone

SKU: Stereo VideoMicX

Cat no: 14006

  • Pressure Gradient Acoustic Principle
  • Cardioid Polar Pattern
  • 40Hz - 2-kHz Frequency Rage (High Pass Filter)
  • 30 hours of battery life
Add to wishlist

Estimated Delivery 2 to 3 days

£365.00 (ex vat) £438.00 (incl vat)

Rode Stereo VideoMic X


Broadcast-grade stereo on-camera microphone

The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference.

The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps.

Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue.

In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable.

An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.



Key Features:

  • Accousitcally matched true condenser capsules
  • Rycote® Lyre onboard shock mounting
  • Balanced professional XLR output
  • Heavy-duty, lightweight aluminium construction
  • High Pass Filter
  • 9V or Phantom Power (P48 - via miniXLR)
  • Level adjustment
  • High Frequency Boost
  • Included pop shield and wind shield (not shown)
  • 10 Year Warranty* 

Product Specification


Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.50"
Polar Pattern Picks up the front and sides and rejects from the rear.
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 143dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 12dB-A
Power Options 9V Battery Powered, +48V phantom power required from mixer or interface
Weight 300gm
Dimensions 102mmH x 118mmW x 100mmD
Output 3.5mm, mini-XLR 
Warranty 1 year with free extension to 10 years following registration

This product includes:

  • Rode Stereo VideoMic X
  • Rode SC2 3.5mm TRS Patch Cable 

Rode Warranties

Register for your Rode HERE.

All RØDE Microphones products are warranted for one year from date of purchase. Depending on the microphone model the warranty can be extended to five years, ten years or lifetime (subject to terms & conditions ) by registering the details of your purchase using this form.

The RØDE Microphones extended warranty gives you the peace of mind that your investment is protected for many years to come.


FAQ's

How do I register for the RØDE extended warranty?


Registration for the extended warranty can be made by completing our online registration form.

Once registered you warranty will be extended to either 10 years, 5 years capped or lifetime, depending on your product.

What is the procedure for returning a faulty product?

Please view our FAQ to try and troubleshoot the issue. If you believe the microphone is at fault please contact our distributor in your country of residence for the correct procedure for returning your product. To find your nearest distributor please use our technical support finder here.

DO NOT send any product back to RØDE without first obtaining a unique RMA number from us.

Is my microphone covered by a service warranty?

RØDE microphones come with a 1 year manufacturers warranty, this can be upgraded to one of our free extended warranties by the registration of the microphone on our website. Please register your microphone using the WARRANTY tab above.

Our warranty covers faulty workmanship and faulty components. RØDE may either repair or replace the product at their sole discretion. The product must be returned to the service centre in the country that the product was purchased for service and repair.

Please note: the warranty does not cover normal wear and tear, nor the use of the product in heavily corrosive, polluted or extremely humid environments.

I want to buy a RØDE mic from overseas. Will the warranty be valid?

The warranty is only valid in the country of purchase so in the unlikely event that the mic were to fail it would need to be returned to the country of purchase for repair.

Alternatively, the mic can be sent to a local distributor but they may (at their discression) charge an admin fee for repairing a product that was not bought locally. As we offer a 10 year warranty this is always worth considering when adding up the initial cost of the mic.

 

Can I still get support for my legacy/discontinued product?

Yes, at RØDE we support our products for as long as possible, many years into their retirement. We understand that you will often have a "go to" mic that you simply cannot work without and we will do everything we can to assist with the repairs of these legacy products.

Spare parts are usually available so please contact your local service agent for assistance with these repairs.


What information should I include with a service/repair request?

The best way to request a service is to register your microphone for warranty and then request a service via the 'My Mics' page.

If you are requesting a service or repair of a product via email please let us know the following information:

  1. Product range
  2. Serial number 
  3. Basic fault description
  4. Your return address
  5. Your contact phone number

With this information we will be able to quickly provide you with further assistance for your product.

Brackets & Mounts Click to expand

Quick View Rode Pivot Adapter

Rode Pivot Adapter

£22.00 (ex vat) £26.40 (incl vat)

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.

Product Videos

RØDE Stereo VideoMic X Overview

Behind The Scenes - Stereo VideoMic X