Your SEO optimized title

Rode Videomic GO Lightweight On-Camera Microphone

Delivers clear, crisp, directional audio with incredible ease of use

Rode Videomic GO Lightweight On-Camera Microphone

Delivers clear, crisp, directional audio with incredible ease of use

SKU: VideoMicGO

Cat no: 9715

  • High quality directional microphone
  • No battery required
  • Integrated Rycote® Lyre® shock mounting
  • Our lightest mic at only 73g
  • Rugged reinforced ABS construction
  • Windshield included
  • 3.5mm mini-jack output
  • Integrated cold-shoe mount with 3/8” thread
User GuideProduct Info Add to wishlist

Estimated Delivery 2 to 3 days

£50.00 (ex vat) £60.00 (incl vat)

Rode Videomic GO Lightweight On-Camera Microphone

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

The VideoMic GO is designed and made in Australia.



Key Features

  • High quality directional microphone
  • No battery required
  • Integrated Rycote® Lyre® shock mounting
  • Our lightest mic at only 73g
  • Rugged reinforced ABS construction
  • Windshield included
  • 3.5mm mini-jack output
  • Integrated cold-shoe mount with 3/8” thread
  • Two year extended warranty when you register your microphone

Product Specification


Acoustic Principle Line Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern Supercardioid - Picks up the front and sides and rejects 150° to the rear.
Address Type End
Frequency Range 100Hz - 16kHz
Maximum SPL 120dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 34dB-A
Weight 73.00gm
Dimensions 79.00mmH x 73.00mmW x 167.00mmD
Output 3.5mm
Warranty 1 year with free extension to 2 years following registration

Rode Warranties

Register for your Rode HERE.

All RØDE Microphones products are warranted for one year from date of purchase. Depending on the microphone model the warranty can be extended to five years, ten years or lifetime (subject to terms & conditions ) by registering the details of your purchase using this form.

The RØDE Microphones extended warranty gives you the peace of mind that your investment is protected for many years to come.


FAQ's

How do I register for the RØDE extended warranty?


Registration for the extended warranty can be made by completing our online registration form.

Once registered you warranty will be extended to either 10 years, 5 years capped or lifetime, depending on your product.

What is the procedure for returning a faulty product?

Please view our FAQ to try and troubleshoot the issue. If you believe the microphone is at fault please contact our distributor in your country of residence for the correct procedure for returning your product. To find your nearest distributor please use our technical support finder here.

DO NOT send any product back to RØDE without first obtaining a unique RMA number from us.

Is my microphone covered by a service warranty?

RØDE microphones come with a 1 year manufacturers warranty, this can be upgraded to one of our free extended warranties by the registration of the microphone on our website. Please register your microphone using the WARRANTY tab above.

Our warranty covers faulty workmanship and faulty components. RØDE may either repair or replace the product at their sole discretion. The product must be returned to the service centre in the country that the product was purchased for service and repair.

Please note: the warranty does not cover normal wear and tear, nor the use of the product in heavily corrosive, polluted or extremely humid environments.

I want to buy a RØDE mic from overseas. Will the warranty be valid?

The warranty is only valid in the country of purchase so in the unlikely event that the mic were to fail it would need to be returned to the country of purchase for repair.

Alternatively, the mic can be sent to a local distributor but they may (at their discression) charge an admin fee for repairing a product that was not bought locally. As we offer a 10 year warranty this is always worth considering when adding up the initial cost of the mic.

 

Can I still get support for my legacy/discontinued product?

Yes, at RØDE we support our products for as long as possible, many years into their retirement. We understand that you will often have a "go to" mic that you simply cannot work without and we will do everything we can to assist with the repairs of these legacy products.

Spare parts are usually available so please contact your local service agent for assistance with these repairs.


What information should I include with a service/repair request?

The best way to request a service is to register your microphone for warranty and then request a service via the 'My Mics' page.

If you are requesting a service or repair of a product via email please let us know the following information:

  1. Product range
  2. Serial number 
  3. Basic fault description
  4. Your return address
  5. Your contact phone number

With this information we will be able to quickly provide you with further assistance for your product.

Audio Cables Click to expand

Quick View Rode VC1 Extension Cable

Rode VC1 Extension Cable

£10.00 (ex vat) £12.00 (incl vat)

Audio Converters & Adapters Click to expand

Quick View Rode VXLR Adaptor

Rode VXLR Adaptor

£10.00 (ex vat) £12.00 (incl vat)

Boom Poles Click to expand

Quick View Rode Boom Pole (3m)

Rode Boom Pole (3m)

£100.00 (ex vat) £120.00 (incl vat)
Quick View Rode Micro Boom Pole (2m)

Rode Micro Boom Pole (2m)

£40.00 (ex vat) £48.00 (incl vat)
Quick View Rode Mini Boom Pole (2m)

Rode Mini Boom Pole (2m)

£80.00 (ex vat) £96.00 (incl vat)

Brackets & Mounts Click to expand

Quick View Rode Pivot Adapter

Rode Pivot Adapter

£30.00 (ex vat) £36.00 (incl vat)

Windjammers Click to expand

Quick View Rode Dead Cat GO

Rode Dead Cat GO

£20.00 (ex vat) £24.00 (incl vat)

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.

Product Videos

Introducing the VideoMic GO - Clear, directional audio on the GO!

Related Products

Rode VideoMic Pro-R Condenser Microphone

Rode VideoMic Pro-R Condenser Microphone

Rycote® Lyre® shock mounting onboard

£132.00 (ex vat) £158.40 (incl vat)
Rode VideoMic with Rycote Lyre Suspension System

Rode VideoMic with Rycote Lyre Suspension System

Designed for use with consumer video cameras and personal audio recorders

£70.00 (ex vat) £84.00 (incl vat)