|Number of Channels||8 in 8 out|
|AD/DA Conversion||Sample Rate: 96.0 kHz / 48.0kHz / 44.1kHz Signal Processing: 24 bits|
|Frequency Response||-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)|
|Total Harmonic Distortion + Noise||0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)|
|Dynamic Range||110 dB|
|Cross Talk||-80 dB or less (Input Gain: +4 dBu, typ.)|
|Nominal Input Level||-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)|
|PAD||20 dB On/Off|
|Input Impedance||600 ohms|
|Recommended Load Impedance||10 k ohms or greater|
|Residual Noise Level (IHF-A, typ.)||-80 dBu or less|
|Equivalent Input Noise Level (E.I.N.)||-128 dB|
|Network Latency||375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1.2 ms)|
|Connectors||Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)|
|Power Supply||REAC EMBEDDED POWER or External Battery (DC 12V - 18V)|
|Power Consumption||24 W*
* Note that if using third-party PoE swtiches or injectors, ensure they can supply the minimum power.
|Phantom Power||+48 V / 14 mA (each input, remote controlled)|
|Accessories||Battery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owner's Manual|
|*1: XLR connector 1: GND, 2: HOT, 3: COLD *2: TRS takes priority if XLR and TRS are simultaneously input to INPUT 5-8. *3: TRS of INPUT 7/8 turns to unbalanced when Hi-Z is turn on. * When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds.|
|(0 dBu = 0.775 Vrms)|
|SIZE AND WEIGHT|
6 lbs. 7 oz.
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.