SmallRig Kinefinity EVF Kit with Top Handle
SmallRig EVF Mount with NATO Clamp and Arri Rosette
This is an EVF mount for Zacuto Gratical HD EVF.
The rosette is in standard ARRI style(31.8mm diameter). It can be attached to a Zacuto Gratical HD EVF with the 1/4” screw on one end, the arm can swivel freely for adjusting the position of EVF.
It can also be attached to a NATO rail for sliding up and down.
- It supports 360°adjustment of monitoring.
- It supports monitor/EVF no more than 2.0kg.
- It could be used together with NATO Rail 1195 for quick release and attachment.
- It comes with Arri rosette mount with 1/4” screw for Zacuto Gratical HD EVF.
- Monitor/EVF no more than 2.0kg
SmallRig Safety NATO Rail with 15mm Rod Clamp 1856
SmallRig Safety NATO Rail with 15mm Rod Clamp 1856 is a multifunctional and lightweight device, which combines the function of rod clamp and NATO rail.
You can mount a 15mm rod on the rod clamp.
It allows for quick and easy attachment.
The same design on the other side enables access to additional attachment of accessories.
The safety pins prevent accidental accessory removal.
1/4’’-20 thread holes make more possibility for added accessories. Key Features
- Multi-functional and lightweight
- EVF mount attachment
- Double side NATO rail
- Safety pins device
- 1/4"-20 thread holes
SmallRig 15mm Rod (2.5 Inch, 1 pc)
2.5 inch long (about 63.5mm), with 1/4" holes at both ends.
Standard 15mm diameter.
SmallRig 1195 Quick Release Safety Rail
Can be attached to any two 1/4-20 holes via (2) 1/4’’-20 screws (included) to provide mount for QR-Handles.
It features spring loaded pins on both ends to prevent accidental removal.
Compatible with the SmallRig Slide Mount and is compatible with RED Epic/Scarlet, Black Magic Camera and more.
SmallRig 2027 Top Handle Accessory Kit
NATO Top Handle with Rod Clamp
SmallRig NATO Top Handle with Rod Clamp 2027 is equipped with an array of 1/4’’ and 3/8’’ threaded holes for DIY choices on top handle, and they could attach short magic arms for wireless video transmitter. The cold shoe on the top handle could attach microphone or attach Double BallHead 1135/1875 for wireless video transmitter for shooting and signal transmission. The holding parts could be adjusted via the screws by 90mm, so that the balance could be achieved and it is also convenient to attach other devices.
The NATO clamp could attach NATO rail 1409/1195, which consumes little time. 15mm single rod clamp could attach 15mm rod, to which you could attach Microphone Shock Mount 1802 or Mini Mounting Plate 1906 for monitor. The cold shoe could attach voice receiver. The Arri locating clamp could attach adapter and magic arms with Arri locating pins. It also comes with Hex spanner to adjust the positions of handle and detach other accessories quickly.
- Cold shoe on the top handle could attach microphone or attach Double BallHead
- Holding parts could be adjusted via the screws by 90mm
- NATO clamp could attach NATO rail 1409/1195
- 5mm single rod clamp could attach 15mm rod
- Cold shoe could attach voice receiver
- Arri locating clamp could attach adapter and magic arms with Arri locating pins
- Hex spanner to adjust the positions of handle