SWIT KA-M20S Dual Pocket V-Mount Battery Hot Swap Plate

SWIT KA-M20S Dual Pocket V-Mount Battery Hot Swap Plate

Pocket V-mount Batteries Extender

Quickly and easily use two PB-M V Lock batteries in a hot-swap capacity on any camera, light or accessory that is powered via V mount batteries.

Due to the smaller size of the PB-M batteries, the KA-M20S has the same footprint of a standard large capacity V mount batteries, even with two PB-M batteries installed.

Two Power Modes

Choose how to utilise your batteries with two power modes; Hot-swap mode, and High Load mode.

Hot-Swap mode drains one battery at a time, allowing a drained battery to be removed & charged (or even replaced) whilst the remaining battery still provides power to your device.

High load mode can be used for powering devices that will require more power consumption than a single PB-M98S can output (100W load), allowing the smaller PB-M batteries to power larger devices. Here, the batteries will be drained simultaneously and cannot be removed without cutting power to the device.

The Hot Swap mode and High Load mode will be automatically switched according to the current power consumption of the device.

Power/Hot Swap Indicators

There are independent power indicators for both batteries, allowing you to judge the battery level for each battery independently.

2 D-tap Power Output

There are 2 D-tap sockets on the KA-M20S plate, allowing multiple accessories to be powered from the same batteries.

Key Features

• Fit 2x PB-M Pocket V-mount Batteries
• Low power device: Hot swap mode
• High power device: High load mode
• Power indictors and hot swap indicators
• SONY&RED power info display
• Provide 2x D-tap sockets
• Slim and light weight, balanced install
• Multiple protection circuit

• Fit 2x PB-M Pocket V-mount Batteries
• Low power device: Hot swap mode
• High power device: High load mode
• Power indictors and hot swap indicators
• SONY&RED power info display

• Input: SWIT PB-M series Pocket V-mount Batteries x2
• Output: V-mount 11-16.8V, D-tap x2, 11-16.8V
• Hot Swap Mode: V-mount: Max load of the single smaller battery, D-tap: Max load of the single smaller battery and limited 150W/10A
• High Load Mode: V-mount: Max load of the single smaller battery x2,D-tap: Max load of the single smaller battery x2 and limited 150W/10A
• Working Temperature: -20°C ~ 50°C 
• Dimension: 148×108×28mm 
• Net Weight: 238g