Product Specification
| Applicable battery | V-mount batteries | |
| DC Output | D-tap ×1 | Max load 10A |
| Pole-tap ×1 | 7.2V, 3A; 5.5/2.1mm | |
| USB ×1 5V, 1A; | USB-A | |
| Dimension | 119×99×21mm | |
| Weight | 103g | |
Swit S-7010S V-Mount Plate with Multi-DC Out
A standard V-mount battery plate to adapt V-mount power solutions
The Swit S-7010S is a standard V-mount battery plate for customers to adapt V-mount power solutions.
Multiple DC Output Sockets
S-7010S provides:
- 1x D-tap output (Max load 10A)
- 1x 7.2V/3A Pole-tap DC output (5.5/2.1mm)
- 1x 5V/1A USB output
The 7.2V pole-tap and USB output can be switched on/off manually, to save energy when there’re no connections.
Robust Thickened Power Pins
As the updated version of S-7000S plate, S-7010S adopts new robust thickened power pins, fully contact with batteries, and reduce the contact resistance from 2.4mΩ to 0.8mΩ, to ensure safety when high current pass through from battery, especially the Cine-camera power application.
Adapt and Installation
You can install the S-7010S onto your broadcast equipment by 4 screw positions, which are compatible with the previous S-7000S. DC cables are opened to customer connection, by disassemble the rear plate first.
Key Features:
- To adapt V-mount power solutions
- Built-in D-tap DC output socket
- Built-in 7.2V pole-tap DC output socket
- Built-in 5V/1A USB output socket
- Robust thickened power pins
SWIT Warranty Periods
| Product Series | Warranty Period |
| Monitors | 2 years conditional |
| HD Converters / Transmitters | 2 years conditional |
| ≤80Wh Batteries | 1 year conditional |
| >80Wh Batteries | 3 years conditional |
| Chargers | 2 years conditional |
| Lighting | 2 years conditional |
This following damages/issues are not covered under warranty:
Monitors
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- The number of bright or dark spots of the LCD panel shall conform to the standard regulated by SWIT. (Check User Manual for details)
- Any damage caused by powering the monitor with third-party power adaptors.
- Any damage of LCD panel caused by external forces.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
HD Converters/Transmitters
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- The attenuation of signal quality resulting from being used in any special environments.
- Any damage caused by powering the product with third-party power adaptors.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Batteries
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Battery performance declines, cannot be charged, or cannot be fully charged that caused by using third-party chargers.
- Battery capacity naturally decreased after a certain cycle times of charging and discharging.
- The capacity loss caused by over 6-month’s storage, and not charging the battery to re-active it during the period.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Chargers
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Damage caused by input voltage beyond the limited range of AC 100V-240V.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Lighting
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Any damage caused by powering the product with third-party power adaptors.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Questions & Answers
There are no questions for this product yet.