SWIT SP-S98/3822S Battery and Charger Bundle
SWIT 98Wh Multi-sockets Square Digital Battery Pack
Square shape design for Cine-cameras
PB-S series camera batteries are compact designed, shorter than normal V/Gold mount batteries, and match perfectly with most of the Cine-cameras.
98Wh / 6.8Ah Capacity
Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.6Ah high capacity.
Can run approx 3 hours for normal ENG cameras.
Multiple output sockets design
2× D-tap output sockets,
1× USB 5V/2A power output socket
PB-S98S is equipped with 2 D-tap DC output sockets, which can power other on-camera equipments together.
The Max output current of D-tap is 8A, 100W.
PB-S98S is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices.
Digital Power Info
LCD display accurate remaining run time
The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.
LCD alarm code description
①P01～P13: The battery trigger protection function and it can be recovered;
② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display.
③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.
Common battery protection code:
||Run out of power, please charge the battery asap.
||Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore.
||Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing.
||The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing.
||Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing.
||Temperature protection, please remove the battery and place at room temperature to recover
Swit S-3822S 2-ch V-Mount Charger
- Square shape design for Cine-cameras
- Max 100W, 8A load
- 2× D-tap output sockets (Max 100W/8A in total)
- 1× USB 5V/2A power output sockets
- LCD display accurate remaining run time
- Display power info in both SONY & RED
- Multiple circuit protections
2-ch V-mount simultaneous charger
The portable charger S-3822S can charge 2 V-mount batteries simultaneously. The charging output is DC 16.8V, 3A×2
LED Charging Indicators
S-3822S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colours:
- Display Red: Battery is charging, capacity below 80%;
- Display Yellow: Battery is charging, capacity above 80%;
- Display Green: Charging finished.
AC-DC Adapting Output
S-3822S has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable (optional purchase), the S-3822S can be used as AC-DC adaptor of DC 14.4V, 5A, 72W output.
- * Please note the AC-DC adapting output will not work when battery is charging.
Optimal Charging Curve
Li-ion charging follows a two-period approach. The first period is constant-current. The battery is charged at the maximum charging rate. When the battery reaches a specified set-point voltage, charging circuits switch to the second period: the constant-voltage period. The charging circuit will provide only enough current to maintain the voltage, to prevent the battery from over charging.
Multiple Safety Protection Design
SWIT chargers can identify different chemical types of batteries, and provide the correct charging program, to protect the batteries from over current, over charging, high temperature, etc.
- Charging V-mount batteries
- 2-ch simultaneous charging
- 3A charging current per channel
- LED charging indicators
- Support AC to 4-pin XLR output
- Light weight and portable