Your SEO optimized title

Datavideo VS-150 Vectorscope & Waveform Monitoring Unit

The Datavideo VS-150 Waveform Monitor & Vectorscope is a table top or rack-mounted instrument that displays HD/SD-SDI vectorscope, waveform, parade, and histogram information at the push of a button.

Datavideo VS-150 Vectorscope & Waveform Monitoring Unit

Datavideo VS-150 Vectorscope & Waveform Monitoring Unit

The Datavideo VS-150 Waveform Monitor & Vectorscope is a table top or rack-mounted instrument that displays HD/SD-SDI vectorscope, waveform, parade, and histogram information at the push of a button.

SKU: 31871

Cat no: 9751

Add to wishlist

Estimated Delivery 2 to 3 days

£710.00 (ex vat) £852.00 (incl vat)

Datavideo VS-150 Vectorscope & Waveform Monitoring Unit

The Datavideo VS-150 Waveform Monitor & Vectorscope is a table top or rack-mounted instrument that displays HD/SD-SDI vectorscope, waveform, parade, and histogram information at the push of a button.

You can always know whether your color and luminance levels are consistent and within specification. The scope data can be easily displayed on a large separate HDMI or HD/SD-SDI monitor or in the HD/SD-SDI video stream.

Video image quality is often determined by a combination of multiple factors such as camera alignment and calibration. The location of the production and the brands of connected video devices especially under Electronic Field Production (EFP) conditions can cause variable image quality in terms of brightness, color saturation, and white balance between different video sources. Traditionally, experienced camera operators would align equipment before a production in order to avoid too much time and resources being spent on adjusting images in post production.

The VS-150 provides quick, accurate, and standardized ways to calibrate and align signals from cameras and other video equipment. The VS-150 can be used to test and compare the accuracy of incoming video signals from cameras and/or connected equipment. The VS-150 can accept either SDI or HD-SDI input for signal analysis. The VS-150 can be set up to provide a clean video loop through on SDI/HD-SDI, whilst still allowing video analysis views on its HDMI output. Alternatively the scope view can also be displayed as a 1280 x 720 HD-SDI output.

  • Rugged and compact single unit that requires only an HD-SDI or HDMI monitor
  • Menu choice of Vectorscope, Histogram, Waveform, and Parade displays as well as clean Video Display output (SDI to HDMI conversion)
  • SDI / HD-SDI input
  • SDI / HD-SDI loop through can provide clean pictures or video analysis view
  • Automatically detects and locks to NTSC, PAL, or HD signals
  • Embedded SDI audio peak meter with selectable monitoring for 4 stereo pairs
  • Switchable 4:3 / 16:9 video thumbnail when input signal is SD-SDI
  • Headphone jack audio monitoring socket with menu-based volume control
  • Save and Recall trace menu options for quick and easy overlay comparison of video traces
  • Parade Display can be toggled between RGB and YCbCr
  • Vectorscope can be toggled between 75% and 100% graticules/bars
  • Waveform detail can be zoomed 20%, 40%, 60%, and 100% - various parts of the waveform can then viewed by changing the X Delay value
  • Capture sampling can be by Field1, Field 2, or Frame
  • 12VDC operation makes the unit suitable for field or studio operation

Product Specification

Interface:

  • 1 x SDI/HD-SDI input (HD-SDI SMPTE 292M 1.5 Gb/s, SD-SDI SMPTE 259M-C 270 Mb/s with Embedded Audio)
  • 1 x SDI/HD-SDI Loop through output
  • 1 x HDMI Output

HD/SD-SDI:
SMPTE 259M-C (270 Mb/s -525/625 Component Video) and SMPTE 292M (1.485/1.001 Gb/s) Connector BNC (IEC 169-8)
Impedance: 75 Ω
Return Loss: HD > 10 dB (1.5 GHz); SD > 15 dB (270 MHz)
Equalization: 656.1' (200.0 m) Belden 8281 cable at 270 Mb/s; 328.8' (100.0 m) typical of Belden 1694A at 1.485 Gb/s

HDMI: Supports HDMI v1.1
Operating Temperature: 32 to 102°F (0 to 50°C)
Humidity: 10 to 90% (non condensing)
Power: 12 VDC, 0.5 A (3.6 W)
Supported Resolutions: 1080p (23.98, 30 Hz), 1080i (50, 59.94, 60 Hz), 720p (29.97, 50, 60 Hz), 576i, 480i
Dimensions (W x H x D): 8.6 x 1.8 x 8.7" (220.0 x 47.0 x 221.3 mm)

  • Datavideo VS-150 Vectorscope & Waveform Monitoring Unit

Datavideo Warranty Periods

To register your Datavideo product, please visit the official website; Datavideo Product Registration.

Standard Datavideo Warranty Period - One Year

Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. The product warranty period begins on the purchase date. If the purchase date is unknown, the product warranty period begins on the thirtieth day after shipment from a Datavideo office.

  • Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under warranty. 
  • Viruses and malware infections on the computer systems are not covered under warranty. 
  • Any errors that are caused by unauthorized third-party software installations, which are not required by our computer systems, are not covered under warranty.

Extended Datavideo Warranty Period - Three Years

All Datavideo products purchased after July 1st, 2017 qualify for a free two years extension to the standard warranty, providing the product is registered with Datavideo within 30 days of purchase. The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase.

  • Please note: Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year.

Questions & Answers

There are no questions for this product yet.

Ask a Question...

Please login to your account to post a question.