Order Now - Usually available to despatch in 7-10 days
Our stock is strategically distributed across multiple warehouses to ensure swift processing and delivery. If you require urgent collection and the product is showing in stock , please call us at 01442 292929 or email sales@proav.co.uk to check for availability.
Our stock is strategically distributed across multiple warehouses to ensure swift processing and delivery. If you require urgent collection and the product is showing in stock , please call us at 01442 292929 or email sales@proav.co.uk to check for availability.
On orders over £250
Request here
Converts HDR video signals using the OETF standard
The HDRC-4000 HDR Production Converter Unit converts HDR video signals using the OETF standard. OETF supports several standards, including Sony’s original S-Log3 curve, SMPTE ST 2084 (PQ) and ITU-R BT. 2100 (HLG), and supports mutual conversion between standards.
The unit also features the AIR MATCHING (Artistic Intent Render Matching) function, which allows you to convert to any format, using HDR signal OETF mutual conversion, so that the “look” is correct on a display that supports that particular OETF standard format.
In addition to HDR OETF conversion, it also supports simultaneous mutual conversion between HDR/SDR, 4K/HD, and 2020/709 color space for conversion of various signal formats. This unit also supports external reference signals, and can be operated as a video signal frame synchronizer.
Various video signal format conversion support
Supports simultaneous conversion of various signal formats.
HDR<->HDR: OETF signal standard conversion
HDR<->SDR: Dynamic range conversion
4K<->HD: Resolution conversion
BT.2020<->BT.709: Colour space conversion
In addition, the SDI signal input/outputs also support 2SI/ SQD, 3G-SDI Level-A/3G-SDI Level-B, and HD-SDI (HD only) signal formats.
Simultaneous output of 4K and HD signals
Simultaneously outputs 4K and HD signals as output video derived from a single input signal. The 4K and HD signal conversion settings can be configured independently.
Dual system signal processing
Equipped with a dual system (channel A, channel B) signal processing function. A 4K signal or HD signal can be freely selected for each input setting.
Video input/output
Inputs
Channel A:
Channel B (1):
(1) You can also select the channel A input signal for the channel B
input.
Outputs
Channel A:
Channel B:
External reference signal
The output signal can be synchronized to an external reference signal (HD tri-level sync or SD sync). The unit is also equipped with a frame synchronizer function allowing it to operate as a frame synchronizer. If an external reference signal is not input, the output can be synchronized to the channel A input signal. Operation without an external reference signal, and input only on channel B is not guaranteed.
Supported signal formats
4K: 59.94P, 50P (3840×2160)
HD: 59.94P, 50P, 59.94i, 50i (1920×1080)
Low-latency output
All signal processing is performed within a single frame, and the output video is delayed by one frame. When the frame synchronizer function is on, the output is delayed by two frames (when 4K is output as SQD signals, there is a further one frame delay for the whole signal).
Minimum delay setting
When set to minimum delay mode, signals that are output without resolution conversion (4K/HD) can be output with a delay of only a few lines (in HD signal terms) (for example, 4K 2SI HDR signal OETF conversion). However, for 4K input and/or output SQD signals, the signal output will have a delay of one frame or higher (same as minimum delay mode not being set).
Through mode setting
In through mode, SDI signals input on the 4K input connectors (BNC × 4) are output on the 4K output connectors (BNC × 4) with a 1-line delay (in HD signal terms). Input/ output on the HD signal side is disabled.
16-channel embedded audio support
Audio signals (16-channel) can be embedded in the SDI signals. The audio signal with a delay matching the video signal is embedded in the output signal.
Remote control
Supports the remote control by Sony system camera products. The menu can be operated from an RCP-1500 series Remote Control Panel or an MSU-1000 series Master Setup Unit.
Configuration file
The various device settings can be stored in any of up to 62 configuration files. File readout control is also supported from an external GPIO (D-SUB connector).
Key Features:
General | |
---|---|
Power requirements | 100 V to 240 V AC, 50/60 Hz |
Current consumption | 1.4 A (max.) |
Operating temperature | 5 °C to 40 °C (41 °F to 104 °F) |
Storage temperature | –20 °C to +60 °C (–4 °F to +140 °F) |
Mass | Approx. 6.8 kg (15 lb) |
Input/output connectors | |
I/O PORT | D-Sub 15-pin connector |
REMOTE A, B | 8-pin multi-connector (2) |
LAN | 8-pin (1) |
Input connectors | |
AC IN | 100 V to 240 V AC (1) |
4K INPUT-A, 4K INPUT- B (3G/HD SDI INPUT) | BNC type (4+4) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps |
HD INPUT-A, HD INPUT-B (3G/HD SDI INPUT) | BNC type (1+1) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps |
REFERENCE IN | BNC type (1) HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 ohms SD: Black burst (NTSC: 0.286 Vp-p, 75 ohms/ PAL: 0.3 Vp-p, 75 ohms) |
Output connectors | |
4K OUT-A, 4K OUT-B (3G/HD SDI OUTPUT) | BNC type (8+8) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps |
HD OUT-A MAIN, HD OUT-B MAIN (3G/HD SDI OUTPUT) | BNC type (1+1) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps 3G-SDI/HD-SDI selectable |
HD OUT-A MONITOR, HD OUT-B MONITOR (HD SDI OUTPUT) | BNC type (1+1) HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps |
REFERENCE OUT | BNC type (1) HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 ohms SD: Composite sync, 0.3 Vp-p, 75 ohms HD SYNC/SD SYNC selectable |
Supplied accessories | |
Number plates (1 set) Operation Guide (1) Operation Manual (CD-ROM) (1) |