SWIT S-3602I 2-ch JVC SSL Charger
SSL-JVC50 DV Battery Charger
S-3602I is a dual channel charger for SWIT S-8i50, and compatible with SSL-JVC50 DV battery that used on JVC GY-HM600/650/HMQ10 cameras.
Dual Channel Simultaneous Charging
S-3602I has 2 charging channels, with DC 8.4V, 2A charging output for each channel, and can charge 2 batteries simultaneously.
The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging.
AC-DC Adapting Output
S-3602I has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 4A in total.
Advanced Charging Curve
Li-ion charging follows a two-period approach. The first period is constant-current. The battery is charged at the maximum charging rate.
When the battery reaches a specified set-point voltage, charging circuits switch to the second period: the constant-voltage period.
The charging circuit will provide only enough current to maintain the voltage, to prevent the battery from over charging.
Multiple Safety Protection Design
SWIT charger can identify different chemical types of batteries, and provide the correct charging program, to protect the batteries from over current, over charging, high temperature, etc.
Key Features:
- Charger for SWIT S-8i50 battery
- 2-ch simultaneous charging
- Compatible with SSL-JVC50 DV battery
- 2 DC adapting output sockets
- 4-level LED charging indicators
SWIT Warranty Periods
Product Series | Warranty Period |
Monitors | 2 years conditional |
HD Converters / Transmitters | 2 years conditional |
≤80Wh Batteries | 1 year conditional |
>80Wh Batteries | 3 years conditional |
Chargers | 2 years conditional |
Lighting | 1 year conditional |
Wireless Video |
1 year conditional |
This following damages/issues are not covered under warranty:
Monitors
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- The number of bright or dark spots of the LCD panel shall conform to the standard regulated by SWIT. (Check User Manual for details)
- Any damage caused by powering the monitor with third-party power adaptors.
- Any damage of LCD panel caused by external forces.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
HD Converters/Transmitters
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- The attenuation of signal quality resulting from being used in any special environments.
- Any damage caused by powering the product with third-party power adaptors.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Batteries
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Battery performance declines, cannot be charged, or cannot be fully charged that caused by using third-party chargers.
- Battery capacity naturally decreased after a certain cycle times of charging and discharging.
- The capacity loss caused by over 6-month’s storage, and not charging the battery to re-active it during the period.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Chargers
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Damage caused by input voltage beyond the limited range of AC 100V-240V.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Lighting
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- Any damage caused by powering the product with third-party power adaptors.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Wireless Video
- Any damage or breakdown caused by use, maintenance, or storage not according to the User Manual’s instructions, or disassemble, repair without authorisation of SWIT.
- The attenuation of signal quality resulting from being used in any special environments.
- Any damage caused by powering the product with third-party power adaptors.
- Any damage caused by factors (such as earthquake, fire, lightning etc.) or human factors.
- Any damage or breakdown not caused by the product’s design, workmanship, or manufacturing quality, etc.
Batteries & Power Click to expand
Power Cables Click to expand
Questions & Answers
There are no questions for this product yet.